Scandi makeover: cabinets love this charming vintage wood look.

Scandi makeover: cabinets love this charming vintage wood look.

Diese DIY-Idee ist ein bisschen wie Urlaub fürs Zuhause! Denn das Makeover ist inspiriert von Skandinavien, genauer gesagt: dem Scandi-Chic. Dieser Wohnstil hat eine sehr angenehme, klare und lässige Ausstrahlung – und die steht auch Deiner weißen Vitrine gut.

 

Mit der d-c-fix Klebefolie Shabby Wood und der Fensterfolie Amena für die Glaseinsätze gibst Du dem Möbel den frischen, lebendigen Scandi-Twist, der einfach unwiderstehlich ist und wirkt!

Preparation

10 min

Time

30 min

Difficulty

Advanced

Cost

Low

Preparation

10 min

Time

30 min

Difficulty

Advanced

Cost

Low

Before & after effect

Preview After Image for {0}
Preview Before Image for {0}

Step-by-step Scandi makeover with d-c-fix

Preview Image for Preparation
Preparation

You got everything you need? Then get started

Cloth cleans surface.
Step 1

Clean the cabinet storage shelf from dust and dirt.


Pencil makes marks on grid of foil backing paper.
Step 2

You can easily determine what you need in terms of adhesive foil with the help of the grid on the backing paper of the d-c-fix foil: place the foil on the cabinet and mark the dimension on the grid using a pencil. Then add some buffer for covering around the edges. Cut the adhesive foil to size.

Smoothing blade smooths foil into place.
Step 3

Peel off the backing paper, place the foil on the cabinet and smooth it firmly into place using the smoothing blade. 

One hand holds the smoothing blade smooths over the foil. The other hand pulls at the backing paper.
Tip

Tip: air bubbles can be prevented when covering by removing a small section of the backing paper at a time and working your way forward along the foil, centimeter by centimeter.

Needle pierces air bubble under the applied foil.
Step 4

If an air bubble has formed, you can pierce it with a needle or the tip of the utility knife and squeeze out the air with the smoothing blade.

Window foil is applied to the glass surface of the cabinet.
Step 5

The crowning Scandi finish: cut Amena window foil to fit the glass surfaces of the cabinet. Then spray the glass with d-c-fix application fluid or water and apply the statically adhesive d-c-fix window foil to the glass and smooth it firmly into place using the smoothing blade.

You did it!