Let’s be honest: Many windows create a bright, pleasant feel – but also a lot of transparency and unwanted glances from outside! Sure, you can fight it with curtains, venetian or roller blinds – but this is costly, not to everyone’s taste. It also ruins the clear look of a beautiful window. So what to do if you want the cleanest, most modern DIY privacy screen possible? Quite simply: Reach for the window foil d-c-fix static PREMIUM Wido! And simply apply to the desired window surfaces. It’s easy to do with this static adhesive opaque foil in a geometric honeycomb design in white, mint and soft gray tones. Here’s how you can do it yourself:
Preparation
10 min
Time
15 min
Difficulty
Beginners
Cost
Low
You will need:
- d-c-fix static PREMIUM Wido
- Pencil
- Measuring tape
- Ruler
- Utility knife
- Smoothing blade
- Spray bottle with water
Preparation
10 min
Time
15 min
Difficulty
Beginners
Cost
Low
Before / After
Let’s go!
Step 1
Take the tape measure and measure all the window surfaces to be covered.
Step 2
Transfer the measurements to the back of the window foil and cut the foil to size with the utility knife.
Step 3
In preparation for applying to the window, use the spray bottle to wet the window generously with water.
Step 4
Peel off the backing paper on the reverse of the adhesive foil.
Step 5
Apply the foil to one corner of the window surface.
Step 6
Use the smoothing blade to firmly press down the foil, using light pressure to remove any excess water between the window glass and the foil.
You did it!
