The d-c-fix Eco Line
Before/After effect
Advantages of the d-c-fix adhesive films
- Free from PVC, phthalates, plasticizers, PAHs (polycyclic aromatic hydrocarbons), heavy metals and solvents
- Simple application
- Easily repositionable and removable
- Matte surface creates a high-quality look
- Resistant to high temperatures short term up to 70°C
Step-by-step
Step 1
Required tools
Step 2
Transfer the dimensions of the piece of furniture being decorated onto the back of the foil
Step 3
Cut the foil
Step 4
Slowly peel off the backing paper from the foil
Step 5
Press down the foil onto the piece of furniture little by little using the smoothing blade
Tips & Tricks for d-c-fix Self-Adhesive Films
Matt black
Matt Grey
Mamora Black
Jungle Palms
Balmond Wood
Maderna Oak
Tucon Wood
Terazzo Stone
Florana
Ornamental Tiles
Before/After effect
Advantages of the Eco Line static-cling window films
- have a matte surface that lends them a high-quality look
- are easy to apply
- can be easily repositioned, removed and reused
- are resistant to temperatures of up to 70°C (short-term exposure)
- are free of PVC, phthalates, plasticizers, polycyclic aromatic hydrocarbons (PAH), heavy metals and solvents
Step by step: Static-cling window films
Step 1
Required tools
Step 2
Use a straight-edge ruler or tape measure to measure the exact width of the area to be covered and determine its position. Then clean the window thoroughly.
Step 3
Use a utility knife and straight-edge ruler to cut the film to the dimensions you have measured.
Step 4
Spray the desired window surface generously with water or application fluid.
Step 5
Carefully remove the backing paper from the window films.
Step 6
Position the cut piece of film in the desired position on the window.
Step 7
Use a smoothing blade, firmly press down the foil from the center outwards to the sides so that any excess water is pushed out by the blade.
Step 8
Finally, use a cloth to wipe the glass surface and the window dry.
Ginkgo
Tropicano
Milky
