How to: DIY privacy screen with lively squirrels!

How to: DIY privacy screen with lively squirrels!

Fall is most beautiful season in the forests – after all, you can really admire the leaves changing colour there. It is precisely this feeling that the window foil d-c-fix static PREMIUM Pineview gives expression to in succinct form. The print with squirrels and foliage is not only a great decorative element, but also provides effective privacy. And anyone can now easily do it themselves. The DIY tutorial shows exactly how it can be done with the static-adhesive Pineview privacy foil. 

Preparation

10 min

Time

15 min

Difficulty

Easy

Cost

Low

You will need:

  • d-c-fix static PREMIUM Pineview
  • d-c-fix application kit with scraper & utility knife
  • d-c-fix application fluid or spray bottle with water
  • Ruler
  • Measuring tape 
  • Pencil
  • Cloth
Preparation

10 min

Time

15 min

Difficulty

Easy

Cost

Low

Start your privacy protection project here with the tutorial: 

The utility knife cuts the window foil along a ruler.
Step 1

Determine the dimensions of your window surfaces, subtract 2 mm for a small distance to the window frame – and cut the window foil accordingly with the cutter.

A spray bottle is used to spray water on the window.
Step 2

Spray the adhesive side of the foil with d-c-fix installation fluid. 

Transparent protective foil is peeled off.
Step 3

Carefully remove the transparent protective foil on the rear side.

The window foil is applied to the window.
Step 4

Next, apply the window foil to the window, making sure to leave 2 mm spacing between it and the silicone joint of the window frame. Apply the window foil to the glass surface.

The smoothing blade applies the window foil.
Step 5

Finally, squeeze out the excess water between the foil and the glass pane using the scraper.

The cloth dries the excess water.
Step 6

Finally, wipe the window dry with a cloth.

You did it!