Privacy screen with d-c-fix static PREMIUM Wido window foil

Privacy screen with d-c-fix static PREMIUM Wido window foil

Let’s be honest: Many windows create a bright, pleasant feel – but also a lot of transparency and unwanted glances from outside! Sure, you can fight it with curtains, venetian or roller blinds – but this is costly, not to everyone’s taste. It also ruins the clear look of a beautiful window. So what to do if you want the cleanest, most modern DIY privacy screen possible? Quite simply: Reach for the window foil d-c-fix static PREMIUM Wido! And simply apply to the desired window surfaces. It’s easy to do with this static adhesive opaque foil in a geometric honeycomb design in white, mint and soft gray tones. Here’s how you can do it yourself:   

Preparation

10 min

Time

15 min

Difficulty

Beginners

Cost

Low

You will need:

  • d-c-fix static PREMIUM Wido 
  • Pencil
  • Measuring tape 
  • Ruler
  • Utility knife
  • Smoothing blade
  • Spray bottle with water
Preparation

10 min

Time

15 min

Difficulty

Beginners

Cost

Low

Before / After

‘After’ image
‘Before’ image

Let’s go!

A tape measure is used to measure the window.
Step 1

Take the tape measure and measure all the window surfaces to be covered.

The utility knife is used to cut the window foil along a ruler.
Step 2

Transfer the measurements to the back of the window foil and cut the foil to size with the utility knife.

The window is sprayed with water.
Step 3

In preparation for applying to the window, use the spray bottle to wet the window generously with water.

The backing paper is removed from the window foil.
Step 4

Peel off the backing paper on the reverse of the adhesive foil.

The window foil is applied to the window.
Step 5

Apply the foil to one corner of the window surface.

The smoothing blade is used to smooth out the window foil.
Step 6

Use the smoothing blade to firmly press down the foil, using light pressure to remove any excess water between the window glass and the foil.

You did it!