Clever combination: privacy protection meets stylish window decoration

Clever combination: privacy protection meets stylish window decoration

It’s wonderful when the sun tickles you awake in the morning, isn’t it? Large windows are great for letting lots of natural light into your home. But you’re not at all happy about the fact that your neighbor keeps peering in at you? Then simply block out the prying glances and beautify your windows at the same time! With the d-c-fix window films, for example in the “Lisboa” design, this can be done particularly elegantly and easily, as the window film adheres statically. This means that you don’t need any adhesive. You can protect your privacy super quickly and easily. Try it out!

Preparation

10 min

Time

15 min

Difficulty

Easy

Cost

Low

Preparation

10 min

Time

15 min

Difficulty

Easy

Cost

Low

Before & after effect

‘After’ image
‘Before’ image

Step-by-step guide for your DIY

Preview Image for Preparation
Preparation

You have everything you need? Then get started!

Window is measured with folding ruler.
Step 1

Clean the windows thoroughly and measure them with a folding ruler.

Utility knife cuts window film along ruler.
Step 2

Transfer the dimensions to the backing paper of the window film and cut along a ruler using the utility knife.

The window is sprayed with installation fluid or water.
Step 3

Spray the window with sufficient installation fluid or water.

Backing film is removed.
Step 4

Remove the backing film from the window film.

The window film is applied to the window.
Step 5

Apply the window film onto the window in the desired position.

Squeegee smooths down window film.
Step 6

Smooth down the window film on the window piece by piece with the squeegee so that any water under the film escapes to the sides.

Excess water is absorbed by cloth.
Step 7

Wipe the window dry with a cloth.

You did it!