What with all the figures, data and facts – it’s easy to get your head in a bit of a spin when you’re at work. This makes taking short breaks all the more important. Coming up with new ideas requires creativity, after all. And sometimes just a hot coffee! That’s why today we’re going to show you how to use the d-c-fix adhesive film “Blado” and the d-c-fix whiteboard film to quickly, easily and inexpensively transform the coffee corner in your office. Find out everything else you need to know in our tutorial with step-by-step guide:
Preparation
15 min
Time
30 min
Difficulty
Easy
Cost
Low
You will need:
- d-c-fix Blado adhesive film
- d-c-fix whiteboard film
- d-c-fix application kit with smoothing blade and utility knife
- Pencil
- Yard stick
- Ruler
Preparation
15 min
Time
30 min
Difficulty
Easy
Cost
Low
Before & after effect
Let’s go!
Preparation
To start with, dismantle the cupboard doors and use a yard stick to measure them.
Step 2
Transfer the dimensions to the backing paper of the Blado adhesive film, leaving a little overhang. Pay attention here to the direction of the pattern on the film.
Step 3
Then cut the various pieces of adhesive film to size using a ruler and a utility knife.
Step 4
Peel the backing paper off the film and stick the piece of film onto the fitting surface. To do this, apply the adhesive film, press it down with the palm of your hand and then smooth it in place using the smoothing blade.
Step 5
Measure the back of a picture frame and then transfer the dimensions to the backing paper of the whiteboard film.
Step 6
Then use a utility knife and ruler to cut the adhesive film to size and stick it to the back of the picture frame. To do so, apply the adhesive film here as before and then use the smoothing blade to firmly press down the film.
You did it!
