The old glass table in the living room is still too good to be replaced? Our d-c-fix static window films lend all glass or mirror surfaces a new luster. We’re going to show you how you can apply the static window film quite easily.
Preparation
5 min
Time
10 min
Difficulty
Beginner
Cost
Low
You will need:
- A roll of d-c-fix Static Window Ally
- A d-c-fix application kit containing a smoother and a cutting knife
- A spray bottle containing water
- Scissors
- A tape measure
- A pencil
Preparation
5 min
Time
10 min
Difficulty
Beginner
Cost
Low
Let’s go!
Step 1
Clean the surface thoroughly and measure the area of application.
Step 2
Transfer the dimensions onto the backing paper of the static window film.
Step 3
Cut the film to size with a pair of scissors.
Step 4
Remove a little bit of the window film backing paper.
Step 5
Spray the entire glass surface with sufficient water.
Step 6
Attach the static adhesive film at the edge and align it with the table.
Step 7
Remove the excess water under the film with the smoother, smoothing from the center outwards.
Step 8
Cut along the edges with a cutting knife to remove any overhang.
